Thread and dethreading molds

Thread and Dethreading Molds

Tianjin Xuansheng Technology Co., Ltd. is a mould manufacturing company and injection molding supplier. TXS has made many styles of thread and dethreading molds. The following are two of them:

Threaded mold

This is an airport runway light control box cover. First, there are three connection holes with threaded buckles on the surface of the product. Secondly, the mold is designed to use a cylinder + rack structure for demoulding.

At the same time, the cylinder plus rack threaded mold makes the starting position of the spiral line constant. In short, the mold structure operates stably, and there is no risk of dragging the product after demoulding.

Dethreading Molds

This is a set of molds for thread-removing mechanisms. Both ends of the product have threaded structure designs inside.

The material is Nylon 6 and 30 percent fiber glass, and the thread cannot be demolding by force ejection.Moreover, the cavity is very deep and the top has a thread design. It needs to be threaded first and then core-pulled by the slider. The mold is not suitable by motor drive. We chose the structural design of mechanical rack threading, uses the mechanical force of the separation of the core and cavity to drive the screw rotation.

In order to protect the appearance of the product, the ejection pin is designed to eject the spurs and take out the product together.

Tianjin Xuansheng Technology Co., Ltd. is a satisfactory mould manufacturing company and injection molding supplier. Customers are welcome to visit the company, and they can also visit the company online at any time.